JVC HX-Z9 Service Manual page 14

3.2 Front panel assembly
• Prior to performing the following procedure, remove the metal
cover, the CD changer mechanism assembly and front panel
assembly.
3.2.1 Removing the cassette mechanism assembly
(See Fig.28)
(1) Disconnect the card wire from connector CN33 on the head
amplifier & mechanism control board.
(2) Remove the two screws Q, and the two screws R attaching
the cassette mechanism assembly.
3.2.2 Removing the headphone board
(See Fig.28)
(1) Remove the screw S and pull out the headphone board
backward.
(2) Cut off the band.
3.2.3 Removing the display system control board
(See Fig.29, 30)
(1) Remove the four screws T attaching the stay bracket (1).
(2) Disconnect the card wires from connector CN43 and
CN880 on the display system control board.
(3) Remove the ten screws U attaching the display system
control board.
1-14 (No.22066)
Head amplifier & mechanism control board
Q
Cassette mechanism assembly
Fig.28
Stay bracket (1)
Display system control board
CN43
Fig.29
U
Display system control board
CN43
Fig.30
CN33
R
Headphone board
R S
T
CN880
U
U
U
CN880