1. Manuals
  2. Brands
  3. Novus Manuals
  4. Network Hardware
  5. NVR-7308P8-H2
  6. User manual

Novus NVR-7308P8-H2 User Manual

Nvr-7000 series
Hide thumbs Also See for NVR-7308P8-H2:
Table of Contents

Advertisement

Quick Links

u s e r 's m a n u a l
NVR-7308P8-H2
NVR-7316P8-H2
NVR-7524P8-H4
NVR-7716P16-H2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NVR-7308P8-H2 and is the answer not in the manual?

Questions and answers

Related Manuals for Novus NVR-7308P8-H2

Summary of Contents for Novus NVR-7308P8-H2

  • Page 1 ’s m a n u a l NVR-7308P8-H2 NVR-7316P8-H2 NVR-7524P8-H4 NVR-7716P16-H2...
  • Page 2 NVR-7000 User’s manual ver.1.0 IMPORTANT SAFEGUARDS AND WARNINGS EMC (2004/108/EC) and LVD (2006/95/EC ) Directives CE Marking Our products are manufactured to comply with requirements of following directives and national regulations implementing the directives:  Electromagnetic compatibility EMC 2004/108/EC.  Low voltage LVD 2006/95/EC with further amendment.
  • Page 3 11. You cannot allow any metal objects get inside the recorder. It might cause serious damage. If a metal object gets inside the device contact the authorised Novus service immediately. 12. The manufacturer does not bear responsibility for damage or loss of data stored on HDDs or other media occurred during the usage of the product.

  • Page 4: Table Of Contents

    NVR-7000 User’s manual ver.1.0 TABLE OF CONTENTS TABLE OF CONTEST ..................... 4 1. NVR MENU ......................6 1.1. Language change .................... 6 1.2. System operations ................... 7 1.3. Live monitoring ....................9 1.4. Searching and playing recorded video ............11 1.5.
  • Page 5 NVR-7000 User’s manual ver.1.0 TABLE OF CONTENTS 2.6.6.2. DDNS ................33 2.6.6.3. PPPoE ................33 2.6.6.4. E-mail setting ..............34 2.6.6.5. Advanced ................34 2.6.6.6. Cloud Service ..............35 2.6.6.7. Bridge ................35 2.7. HDD Mgr ....................... 36 2.7.1. Basic info ..................36 2.7.2.

  • Page 6: Nvr Menu

    NVR-7000 User’s manual ver.1.0 NVR OPERATING 1. NVR MENU 1.1. Language change After starting device, the video output default to multi-window output mode. By default NVR is using English language interface. To change language please follow the procedure like below: ...

  • Page 7: System Operations

    NVR-7000 User’s manual ver.1.0 NVR OPERATING After that GUI Interface will be reloaded and menu language will be applied. 1.2. System operations To start NVR plug power cable and switch on power button. The power led turns on. After booting, the video output default to multi-window output mode.
  • Page 8 NVR-7000 User’s manual ver.1.0 NVR OPERATING While NVR is log out there would be displayed live view or defined sequence. To be able to operate NVR need to log in first. Bring up login window by clicking anywhere on screen. Then would be displayed window as below: Choose user name which you would like to use and type password by virtual keyboard.

  • Page 9: Live Monitoring

    NVR OPERATING 1.3. Live monitoring Novus network video recorders features a multilingual OSD menu allowing for adjusting the settings of the device. Available languages are: English, Polish, and others As soon as the NVR completes its initialization process, it will enter the real-time monitoring image.
  • Page 10 NVR-7000 User’s manual ver.1.0 NVR OPERATING Right mouse click on screen will bring QUICK MENU for quick operation. QUICK MENU description: Item Icon Description Volume Click to enable/disable audio Information On mouse cursor display current device temperature Fast Playback Click to start playback of latest 5minutes recording Click to change split screen mode, click right/left to change Split Screen channels...

  • Page 11: Searching And Playing Recorded Video

    NVR-7000 User’s manual ver.1.0 NVR OPERATING Left mouse click on video channel will display Channel menu. Item Icon Description Digital zoom Allow to zoom in picture of selected channel Menu allow to adjust image parameters for selected channel Video adjust Manual record Enable/Disable manual recording of selected channel.
  • Page 12 NVR-7000 User’s manual ver.1.0 NVR OPERATING VIDEO PLAYBACK WINDOW PLAYBACK CALLENDAR GRAPH WITH GRAPH ZOOM BUTTONS RECORDING On calendar you can easy change playback range. Use GRAPH ZOOM buttons to expand displaying graph on screen. Graph is displaying sum of each channel available recordings. Use playback buttons to operate recordings.
  • Page 13 NVR-7000 User’s manual ver.1.0 NVR OPERATING To manage recording Data Inquiry menu and Data Mgr. Then following window appears: Data manager allow to search records according to event type. To find records choose channel, date from calendar and recording mode (motion, alarm, etc.) and press Inquiry button. After searching list will be displayed, including recording mode, size and time information.

  • Page 14: Ptz

    NVR-7000 User’s manual ver.1.0 NVR OPERATING 1.5. PTZ Control PTZ button opens new window which allows to control the operations of a selected PTZ camera. To start the PTZ click RMB on selected camera and choose icon. Then following window will shown: Use it to adjust the pan, tilt, focus, zoom and iris of the camera.

  • Page 15: Video Adjust

    NVR-7000 User’s manual ver.1.0 NVR MENU 1.7. Video Adjust Menu allows to camera image settings: user can set the brightness, contrast, saturation remotely in associated camera. Note: Not every camera model and network protocol allow to change all camera settings remotely. 1.8.
  • Page 16 NVR-7000 User’s manual ver.1.0 NVR MENU 1.9. Preview Effect Menu allows adjust display to get better fluency or decrease delays. 1.10. Shutdown Menu allows to shutdown NVR in safe way. After click Shutdown there would be displayed question to confirm. When it’s done it would be confirmed by popup message, then you could cut the power. 1.11.

  • Page 17: Nvr Configuration

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2. NVR CONFIGURATION Main Menu allow to configure various NVRs parameters. It is divided on 9 section. To start Main Menu use icon . Table below show short description each of it: Item Icon Description Menu allows to search and playback window recordings.
  • Page 18 NVR-7000 User’s manual ver.1.0 NVR OPERATING  Manual Backup allow to search records according to event type and date. To find records choose channel, device type, time range, file status and mode (motion, alarm, etc.) and press Inquiry button. After searching list will be displayed, including recording mode, size and time information.

  • Page 19: Record

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.3. Record - menu contains video parameters, manual video and schedule parameters. 2.3.1. Record Para. - setting of streams parameters for every channel. Configuration is set up remotely in camera, associated to the selected channel. After selecting Channel No.

  • Page 20: Manual

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.3.2. Manual - menu allows to quick change of manual recording of selected channels. 2.3.3. Schedule - setting continuous record plan for each channel. After selecting Channel No. set up schedule of selected channel. You could set up for each day independent time range or use All to set up the same for all days.

  • Page 21: Alarm

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.4. Alarm - menu allow to define various events, and specify the conditions to notify the user. 2.4.1. Motion - menu allows to configure schedule of motion recording and rules of the built-in camera motion detection function. Configuration of motion rules is set up remotely in camera, associated to the selected channel.

  • Page 22: Sensor

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION Available reaction are: System alarm out (always active). Trigger recording, Alarm output activation, Email, PTZ function. By using Copy button you can copy current settings to other required channel. Please remember to click Save current channel, before copy to other channels. Reset Default button restore all setting of current channel to factory default.

  • Page 23: Alarm Output

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION Available reaction are: System alarm out (always active). Trigger recording, Alarm output activation, Email, PTZ function. By using Copy button you can copy current settings to other required channel. Please remember to click Save current channel, before copy to other channels. Reset Default button restore all setting of current channel to factory default.

  • Page 24: Exception

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.4.4. Exception - configuration of the alarm system events and specify the alarm reaction. Select Alarm Type, Tick Enable Alarm to activate it and configure the reaction way for it which you need. Available types and possible problems are: ...

  • Page 25: Ip Camera Management

    NVR-7000 User’s manual ver.1.0 NVR OPERATING 2.5. IP Camera Management: menu allows to manage IP cameras connected to the system. After opening menu following window appear: Selection A is search part. While opening menu it will automatically discover IP Cameras and list them.
  • Page 26 NVR-7000 User’s manual ver.1.0 NVR OPERATING  Information - display detailed information about current camera.  Edit - menu allows to change IP address of camera (directly in camera), update user name and password.  Delete - remove camera from system ...
  • Page 27 NVR-7000 User’s manual ver.1.0 NVR OPERATING There are two possibility to connect IP cameras:  Camera is connected to build-in PoE switch. In such situation camera will be automatically discovered and added to NVR at channel corresponding to PoE port of NVR (A selection).

  • Page 28: Setting Management

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.6. Setting Management - menu allow to define various system settings and network parameters. 2.6.1. General - menu allows to configure the settings of language, resolution and other device parameters. Following function are available: ...

  • Page 29: Time

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.6.2. Time - user can specify the time and date setting, DST (Daylight Saving Time) settings and NTP settings. Time setting window include time and date setting, date format and time standard. Button DST open new window to set up Daylight Saving Time.

  • Page 30: Output

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.6.3. Output Channel setting - configuration of camera image and display parameters. These function are set up remotely in camera. After selecting Channel no. following parameters are available: Camera Name, Video Mask, Time Display, Channel name display, Time position, Video Adjust, CH name position Note: Not every camera model and network protocol allow to change all camera settings remotely.

  • Page 31: Com

    Reset Default button restore all setting of current channel to factory default. Note: For NOVUS PTZ camera connected by ONVIF protocol no need to configure anything on this menu. All cameras using ONVIF directly for PTZ communication. All rights reserved © AAT HOLDING S.A.

  • Page 32: Network

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.6.6. Network - menu allows to configure network parameters of the device including email, DDNS and email setting. 2.6.6.1. Network setting - configuration of basic network parameters of the device. Following parameters are available: ...

  • Page 33: Ddns

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.6.6.2. DDNS - configuration of Dynamic DNS service To Enable DDNS select server, provide domain name, username and password. Next click Login or tick Auto Login checkbox to start DDNS service. Use DDNS Test button to verify configuration. Note: Although the DVR supports dynamic IP addresses, it is advised that DDNS support should be performed at the local router that DVR is connected to.

  • Page 34: E-Mail Setting

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.6.6.4. Email setting - configuration of Email account. To set up email sending configure parameters of email account. Provide parameters: Server SMTP, Username and Password, Sender Email, Receiver email, port of SMTP communications, and time period.

  • Page 35: Cloud Service

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.6.6.6. Cloud Service - menu allows to enable cloud access to NVR. For proper operation of cloud service UPnP function should be enable, and router should support UPnP. Tic Enable Ivview to enable cloud access to NVR. After changing parameters click Save button. There are also two QR codes to scan in mobile device.

  • Page 36: Hdd Mgr

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.7. HDD Mgr. - menu allows to manage of the NVR storage. 2.7.1. Basic info - information about installed HDD on NVR, and it’s status. There are information abut installed HDD and USB flash memory, it’s status, size and used space. There are possibility to change HDD behaviour from Read-Write to Read Only, by clicking R-W setting.

  • Page 37: Storage Settings

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.7.3. Storage Settings - advanced configuration of recordings. To change overwrite mode, from drop down list select Manual, then you have to replace HDD each time when it would be full. If needed to set up time record limit, you need to set up Trigger time, choose channel, tick Enable and set up numbers of days.

  • Page 38: System Info

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.8. System Info. - information about the NVR status, and devices connected to it. 2.8.1. Device information - Device information displays the system software version and other relevant information. 2.8.2. Channel Status - The statistic table displays the total real-time bitrate received by NVR from cameras.

  • Page 39: Poe Status

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.8.3. PoE Status - Menu shows the power supply situation, power consumptions, and power on time of every POE channel. 2.8.4. Alarm Status - Menu shows the all connected devices alarm information: sensor alarm, motion alarm, video lost alarm, PoE conflict;...

  • Page 40: Online Status

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.8.5. Online Status - menu displays the relevant information of the network server, that currently login the device, display the login username, server IP and log time. 2.8.6. Log Inquiry - menu allow to search the logs according to different types and different date and time, as shown in the picture below.

  • Page 41: System Maintenance

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.9. System Maintenance - menu allows to configure, system settings, user management, and other system features. 2.9.1. Quick setting - feature allow to quick configure NVR, set up main functionality and assign cameras to channels. Detailed description of it you will find in chapter 3.4. of User’s manual (Short) . 2.9.2.
  • Page 42 NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION Please provide following values:  User Name : enter user name.  Password / Confirm Password: enter the password.  Select a Group that user belongs to, by default is Normal but you could create your own group. ...

  • Page 43: Reset To Default

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.9.3. Reset to default - menu responsible for restoring default NVR settings  Reset Default: will clear setting of features, selected in given window.  Reset Factory Settings: Default: will recover all NVR settings to the factory default. 2.9.4.
  • Page 44 NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION If no follow procedure below:  Open upgrade menu  Choose USB upgrade button and confirm proceed of upgrading system.  Click UPGRADE  The progress bar displays the progress of the firmware upgrade process. ...

  • Page 45: Auto Reboot

    NVR-7000 User’s manual ver.1.0 NVR CONFIGURATION 2.9.5. Auto reboot - menu allow to set auto reboot feature, with selected frequency. Tick System Auto Restart checkbox to enable feature. Set up restart Day and Hour, when restart occur. After changing parameters click Save button. Reset Default button restore all setting of current window to factory default.

  • Page 46: Network Operations Utilizing Web Broswer

    NVR-7000 User’s manual ver.1.0 NETWORK OPERATIONS UTILIZING WEB BROSWER 3. NETWORK OPERATIONS UTILIZING WEB BROSWER Network Video Recorder features the possibility of controlling video data using network connections and web browser (Internet Explorer is recommended). 3.1. Recommended PC specification for web browser connections Requirements below apply to connection with an NVR, assuming smooth image display 4 channel in 1920x1080 resolution and 25 fps speed.

  • Page 47: Configuration Of Remote Access

    NVR-7000 User’s manual ver.1.0 NETWORK OPERATIONS UTILIZING WEB BROSWER 3.3. Configuration of remote access If you are going to use Internet to remote connect with the NVR you need to have a Public IP Address (Static or Dynamic). Check your Network Provider if you don't know it. More over you have to configure NVRs NETWORK SETTING and Router in right way.

  • Page 48: Live Monitoring Interface

    NVR-7000 User’s manual ver.1.0 NETWORK OPERATIONS UTILIZING WEB BROSWER 3.4. Live monitoring interface After successful logging into a user interface using web browser, the following window opens: MENU BAR VIDEO WINDOW CHANNEL LIST PTZ MENU Description of interface features: To enable/disable all channel preview click All channel on channel list or icon on video window.

  • Page 49: Searching And Playing Recorded Video

    NVR-7000 User’s manual ver.1.0 NETWORK OPERATIONS UTILIZING WEB BROSWER Menu description: Item Description Live Live view cameras interface Move to the playback screen, which allow to search and watch Playback recordings.. Allow to search the logs according to different types and different date and time.
  • Page 50 NVR-7000 User’s manual ver.1.0 NETWORK OPERATIONS UTILIZING WEB BROSWER You can identify the type of the recording data by the color in the bar.  Green (Manual) : data originating from manual recording  Blue (Schedule) : continuous recording data. ...

  • Page 51: Log

    NVR-7000 User’s manual ver.1.0 NETWORK OPERATIONS UTILIZING WEB BROSWER 3.6. Log - You can search the logs according to different types and different date and time, as shown in the above picture.  Major Type: there are All Type, Alarm, Exception and Operation for selection. ...

  • Page 52: Configuration

    NVR-7000 User’s manual ver.1.0 NETWORK OPERATIONS UTILIZING WEB BROSWER 3.7. Configuration Setup menu contains minor settings of NVR. Whole interface is similar to interface displayed on NVRs monitor. IP camera settings is placed in Camera Management menu. For detail of each settings please refer “System Setup” description in chapter 2 - NVR CONFIGURATION.
  • Page 53 NVR-7000 User’s manual ver.1.0 NETWORK OPERATIONS UTILIZING WEB BROSWER All rights reserved © AAT HOLDING S.A.
  • Page 54 2017-05-08 MB, MK AAT Holding sp. z o.o., 431 Pulawska St., 02-801 Warsaw, Poland tel.: +4822 546 07 00, fax: +4822 546 07 59 www.novuscctv.com...

This manual is also suitable for:

Nvr-7316p8-h2Nvr-7716p16-h2Nvr-7524p8-h4

Table of Contents