Table of Contents
Advertisement
B Configuring Bluetooth Settings
Enable the phone's Bluetooth.
Note
For details about setting
●
procedures, see your phone
documentation.
C Pairing the watch with a phone
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2.
Y On the Home Screen, tap the "G-
SHOCK Connected" icon.
3.
Y Perform the operation shown on the
screen of the phone to be paired with.
If a pairing prompt message appears,
●
perform the operation shown on the
phone screen.
When pairing starts, the second hand
●
will move to 12 o'clock. When pairing is
complete, the second hand will move to
"C".
C mark
Auto Time Adjustment
The watch can be set to adjust its time setting
automatically each day in accordance with the
phone time.
Using Auto Adjust
●
Your watch adjusts its time setting four times
a day according to a preset schedule. If you
leave your watch in the Calendar Mode, it will
perform the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
Operation Guide 5513
Important!
Note that the watch will not perform
●
auto time adjustment if it enters the
Calendar Mode while any one of the
conditions below exists.
While a stopwatch elapsed time
ー
measurement or timer countdown
operation is in progress
Battery power is low.
ー
Watch is in Level 2 power saving.
ー
While it is too far away from its
ー
paired phone
When communication is not
ー
possible due to radio interference,
etc.
While the phone is updating its
ー
system
Note
If the watch does not indicate the
●
correct time even if is able to connect
with a phone, correct the hand and
date indicator positions.
Adjusting Hand and Day Indicator
l
Alignment
If there is a World Time City specified
●
with G-SHOCK Connected, its time
will also be synchronized
automatically.
The watch will connect with the
●
phone and perform auto time
adjustment at around 12:30 a.m.,
6:30 a.m., 12:30 p.m. and 6:30 p.m.
The connection is automatically
terminated after auto time
adjustment is complete.
Summer Time
●
Once the watch is connected with a phone and
its time is adjusted with the phone time, its
Home City time and World Time will
automatically switch between standard time
and summer time as required, even if the
watch is no longer connected with the phone.
Summer Time Switching
l
Adjusting the time setting manually with a
●
watch operation will cancel auto standard
time/summer time switching.
A G-SHOCK Connected screen shows
●
information about summer time periods.
Triggering Immediate Time Adjustment
●
The watch will synchronize its time setting to
that of the phone immediately when they are
connected with each other. Whenever you
want to adjust the watch's time setting based
on your phone's time, perform the procedure
below to connect with a phone.
1.
X Press (C).
This causes the second hand to move to
"R". When the watch connects with a
phone, the second hand will normally
move to "C" and then the watch's time
setting will synchronize with the phone's
time.
The watch will disconnect from the
●
phone automatically after time
synchronization is complete.
Configuring World Time
Settings
Specifying a World Time City with G-SHOCK
Connected causes the city's time to be
indicated by the small hour and minute hands.
Watch settings can be configured for auto
summer time switching for the World Time
City.
Note
G-SHOCK Connected World Time
●
lets you select from among
approximately 300 cities as the
World Time City.
6
Hide quick links:
Advertisement
Table of Contents
