Casio QW 5513 Operation Manual page 17

Q2
I changed the phone's Bluetooth
from enabled to disabled, and now I
can't connect anymore.
On the phone, re-enable Bluetooth, and then
go to the Home Screen and tap the "G-
SHOCK Connected" icon. Next, on the watch,
hold down the CONNECT button (C) for about
2 seconds.
Q3
I can't connect after turning off the
phone.
Turn on the phone and tap the "G-SHOCK
Connected" icon. Then on the watch, hold down
the CONNECT button (C) for about 2 seconds.
Phone-Watch Connection
Q1
I can't establish a connection
between the phone and watch.
Have you tried turning your phone off and
then back on again?
Turn on the phone and tap the "G-SHOCK
Connected" icon. Then on the watch, hold
down the CONNECT button (C) for about 2
seconds.
Has the watch been re-paired with the
phone?
After unpairing the watch and phone, re-
pair them again.
Unpairing
l
If you are unable to establish a
connection...
Delete the pairing information from the
watch, and then re-pair the watch and
phone.
See "Unpairing".
l
Operation Guide 5513
Changing to a Different
Phone Model
Q1
Connecting the current watch to
another phone.
Pair the watch with the phone.
After Purchasing Another Phone
l
Phone Finder
Q1
Phone Finder does not work.
Are the phone and watch disconnected?
Phone Finder does not work during
Bluetooth connection.
Is G-SHOCK Connected running?
Phone Finder will not work unless G-
SHOCK Connected is running. On the
Home Screen, tap the "G-SHOCK
Connected" icon to start up the app.
Other than the above.
If the phone does not respond after a few
seconds, it could mean that the phone is
located too far from the watch. Change to
a different location and try again.
Q2
It takes some time before the phone
responds.
The phone will emit a tone when a connection
is established with the watch, which takes a
few seconds.
Q3
The phone cannot be found even
when it is close to the watch.
Since communication is performed using
radio waves, the watch may not be able to find
the phone even if it is within two meters.
Certain environments may make the
allowable communication range very short.
Auto Time Adjustment
Q1
When does the watch sync its time
setting with the phone?
The watch will connect with the phone and
perform auto time adjustment at around 12:30
a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The
connection is automatically terminated after
auto time adjustment is complete.
Q2
Auto time adjustment is performed,
but the time setting is not correct.
Is auto time adjustment not being
performed according to its normal
schedule?
Note that auto time adjustment is not
performed for 24 hours after swapping of
the Home Time and World Time, or after
the time setting is adjusted manually on
the watch. Auto time adjustment will
resume 24 hours after either of the above
operations is performed.
Is auto time adjustment enabled?
Auto time adjustment will not be
performed at the scheduled times unless
it is enabled. Establish a connection
between the watch and phone, and then
use G-SHOCK Connected to enable auto
time adjustment.
Using the Watch in a Medical Facility or
l
Aircraft
Is the watch's battery charged sufficiently?
Connection with a phone is not possible
while the charge is low. Charge the watch.
Is a stopwatch or timer operation being
performed?
Auto time adjustment will not start at the
scheduled times if a stopwatch time
measurement operation is in progress.
Stop the measurement operation.
Q3
Time is not displayed correctly.
The phone's time setting may be incorrect
because it is unable to connect with its
network due to being out of range, etc. If this
happens, connect the phone to its network
and then adjust the time setting.
17