Copyrights And Registered Copyrights; Troubleshooting - Casio QW 5513 Operation Manual

Stopping Radio Wave Emission by This
●
Watch
The watch is emitting radio waves whenever
the second hand is pointing to "C" (Bluetooth
connected) or "R" (Bluetooth connection
standby).
Even if the second hand is not pointing at "C"
or "R", the watch will automatically attempt to
connect with a phone four times a day to adjust
its time settings.
When in a hospital, on an aircraft, or in any
other area where the use of radio waves is not
allowed, use the operations below to stop
radio wave generation.
Stopping Radio Wave Generation
●
Press any button to terminate the Bluetooth
connection.
Connected After disconnection
Disabling Auto Time Adjustment
●
Configure G-SHOCK Connected settings to
disable synchronization between the watch
and phone.
Using the Watch in a Medical Facility or
l
Aircraft
Copyrights and Registered
Copyrights
The Bluetooth ® word mark and logos are
●
registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such
marks by CASIO Computer Co., Ltd. is
under license.
iPhone and App Store are registered
●
trademarks of Apple Inc. in the United
States and other countries.
iOS is a trademark or registered trademark
●
of Cisco Systems, Inc.
GALAXY, GALAXY Note, and GALAXY S
●
are registered trademarks of Samsung
Electronics Co., Ltd.
Android and Google Play are registered
TM
●
trademarks of Google Inc.
Other company names and product names
●
used herein are trademarks or registered
trademarks of their respective companies.
Operation Guide 5513

Troubleshooting

I can't pair the watch with a
phone.
Q1
I've never been able to establish a
(pairing) connection between the
watch and phone.
Are you using a supported phone model?
Check if the phone model and its
operating system are supported by the
watch.
For information about supported phone
models, visit the CASIO Website.
http://world.casio.com/os_mobile/wat/
Did you install G-SHOCK Connected on
your phone?
G-SHOCK Connected needs to be
installed on your phone in order to
connect with the watch.
A Installing applications
l
Are your phone's Bluetooth settings
configured correctly?
Configure the phone's Bluetooth settings.
For details about setting procedures, see
your phone documentation.
iPhone Users
"Settings"n"Bluetooth"n On
●
Android Users
Enable Bluetooth.
●
Is a stopwatch or timer operation being
performed?
The watch cannot pair with a phone while
a stopwatch time measurement operation
is in progress. Stop the measurement
operation and then pair with a phone.
Other than the above.
Some phones need to have BT Smart
disabled to use G-SHOCK Connected.
For details about setting procedures, see
your phone documentation.
On the Home Screen, tap: "Menu" n
"Settings" n "Bluetooth" n "Menu" n "BT
Smart settings" n "Disable".
I can't reconnect the watch
and phone.
Q1
The watch will not re-connect with the
phone after they are disconnected.
Is G-SHOCK Connected running?
The watch cannot re-connect with the
phone unless G-SHOCK Connected is
running on the phone. On the phone's
Home Screen, tap the "G-SHOCK
Connected" icon. Then on the watch, hold
down the CONNECT button (C) for about
2 seconds.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on, and
then tap the "G-SHOCK Connected" icon.
Next, on the watch, hold down the
CONNECT button (C) for about 2
seconds.
Is the watch's battery charged sufficiently?
Connection with a phone is not possible
while the charge is low. Charge the watch
and then connect with the phone.
Is a stopwatch or timer operation being
performed?
The watch cannot connect with a phone
while a stopwatch time measurement
operation is in progress. Exit the watch's
Airplane Mode. Then hold down the
CONNECT button (C) for about 2
seconds.
16