Using The Timer; Alarm; Configuring Alarm Settings; Turning An Alarm On Or Off - Casio QW 5513 Operation Manual

Using the Timer

1.
Press (B) to start the countdown.
A beeper will sound for 10 seconds to let
you know when the end of a countdown is
reached.
To pause an ongoing countdown, press
●
(B). To reset a paused countdown to the
start time, press (D).
2.
Press any button to stop the tone.
3.
Press (A) twice to return to the
Timekeeping Mode.

Alarm

The watch will beep when the alarm time is
reached.
The beeper is muted in the cases described
●
below.
When battery power is low
ー
When watch is at Level 2 power saving
ー
Power Saving
l
Getting ready
Perform this procedure in the Alarm Mode.
Navigating Between Modes
l
Alarm Mode
Operation Guide 5513

Configuring Alarm Settings

1.
Pull out the crown to the first click.
This turns on the alarm.
Hours
2.
Rotate the crown to change the alarm time
setting.
3.
Push the crown back in.
4.
Press (A) once to return to the Calendar
Mode.
Note
A beeper will sound for 10 seconds
●
to let you know when the alarm time
is reached.

Turning an Alarm On or Off

Press (D) to toggle the alarm between on and
off.
Alarm on

Stopping an Alarm

While the alarm is sounding, press any button
to stop it.
Alarm on
Crown
24-hour
Minutes
Alarm off

Light

The watch has an LED light that you can turn
on for reading in the dark.
Getting ready
Perform this procedure in the Calendar Mode
or Alarm Mode.
Navigating Between Modes
l
Calendar Mode Alarm Mode
Turning On the Illumination
Light
Pressing (B) turns on the light.
The LED light will turn off automatically if the
●
alarm starts to sound.
The LED light is disabled while the hands
●
are moving at high speed.
13