World Time - Casio QW 5513 Operation Manual

World Time

Q1
The time for a World Time City is not
correct.
The summer time start date and time, end date
and time, or other rules were changed by
authorities.
Q2
After swapping your current location
(Home City) time with the World
Time, the World Time City time is not
correct.
Use the G-SHOCK Connected to specify a
World Time City.
Alarm
Q1
The alarm does not sound.
Is the watch's battery charged?
Keep the watch exposed to light until it
recharges sufficiently.
Solar Charging
l
The crown is pulled out.
The alarm will not sound while the crown
is pulled out. Push the crown back in to its
normal position.
Is the alarm enabled?
Enable the alarm.
Turning an Alarm On or Off
l
Operation Guide 5513
Hand Movement and
Indications
Q1
I don't know what mode the watch is
in.
You tell which mode the watch is currently in
by checking the position of the mode hand.
Navigating Between Modes
l
Hold down (A) for about two seconds to
●
enter the Calendar Mode.
Q2
Why can't I perform any button
operations while high-speed hand
movement is in progress?
Except for the mode navigation button, button
operation is disabled while high-speed hand
movement is in progress after a watch setting
is changed, etc. Wait until the hands stop
moving before performing button operations.
Q3
The second hand is jumping at two-
second intervals.
Battery power is low. Keep the watch exposed
to light until it recharges sufficiently.
Solar Charging
l
Q4
All hands are stopped at 12 o'clock
and buttons do not work.
The battery is dead. Keep the watch exposed
to light until the battery recharges sufficiently.
Solar Charging
l
Q5
The hands suddenly start moving at
high speed.
This is due to one of the reasons below, and
does not indicate malfunction. Simply wait
until normal hand movement resumes.
The watch is recovering from a power
●
saving state.
Power Saving
l
Establish a connection with the phone and
●
correct the time setting.
Auto Time Adjustment
l
Q6
Hands are stopped and buttons do
not work.
The watch is in the charge recovery mode.
Wait until the recovery process is complete
(for about 15 minutes). The watch will recover
more quickly if you place it in a brightly lit
location.
Q7
The indicated current time and date
are not correct.
Strong magnetism or impact can cause the
hands and/or the indicator to go out of
alignment. Adjust hand and/or day indicator
alignment.
Adjusting Hand and Day Indicator
l
Alignment
Check the information below to find out how
●
to align the hands and/or day indicator
manually.
Adjusting Hand and Day Indicator
l
Alignment
Q8
The time setting is correct, but the
day indicator is between days.
Is the date setting being updated?
For information about how the day
changes, see the section below.
Hand and Day Indicator Movement
l
Other than the above.
The day indicator is not aligned correctly.
Adjust day indicator alignment.
Adjusting Hand and Day Indicator
l
Alignment
Check the information below to find out
●
how to align the hands and/or day
indicator manually.
Adjusting Hand and Day Indicator
l
Alignment
18