Protecting The Environment - DeWalt DC300 Manual

● Switch on the tool and feed the blade into the
material at full speed, holding the tool fi rmly
against the workpiece.
Dust extraction (fi g. A)
Your tool is fi tted with a dust extraction outlet (5).
● Always use a vacuum extractor designed in
compliance with the applicable Directives
regarding dust emission when sawing wood.
Vacuum hoses of most common vacuum
cleaners will fi t directly into the dust extraction
spout.
WARNING: Do not use a vacuum
extractor without proper spark
protection when sawing metal.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your D WALT power tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING:
● Unplug the charger before cleaning the
housing with a soft cloth.
● Remove the battery pack before
cleaning your power tool.
● Keep the ventilation slots clear and
regularly clean the housing with a soft
cloth.
Optional accessories
WARNING: Since accessories, other
than those offered by D
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.

Protecting the environment

Separate collection. This product must
not be disposed of with normal
household waste.
Should you fi nd one day that your D
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
D WALT provides a facility for the collection and
E
recycling of D WALT products once they have
E
reached the end of their working life. To take
advantage of this service please return your
product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D WALT offi ce at the address indicated in this
E
manual. Alternatively, a list of authorised D
E N G L I S H
WALT, have
E
WALT, recommended
E
WALT product
E
WALT
E
37