Advertisement
This is used to set the language displayed by the browser-based utility. Select the desired language from
the drop-down menu.
Device IP
This setting determines whether the device's IP address is obtained automatically from a DHCP server,
such as your network router (Automatic Configuration - DHCP), or is set manually (Static IP).
If your network has a DHCP server (usually the network router) assigning IP addresses to your network
devices, then keep the default, Automatic Configuration - DHCP. The device will request an IP address
from the DHCP server. If no DHCP server is found, then the device will use its default static IP address,
10.100.1.1, until it has detected a DHCP server and is assigned a dynamic IP address.
For most home networks, leaving this setting Automatic Configuration - DHCP as is recommended.
If you want to set a permanent static IP address for this device, then select Static IP. If you select Static
IP, complete the following fields:
- IP Address
Enter a unique IP address that will be used to access the browser-based utility.
- Subnet Mask
Enter the subnet mask of your network.
- Default Gateway
Enter the IP address of the default gateway for your network (in most cases, this is your router).
Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
Setup > Operation Mode
Advertisement
