Wireless Bridge Mode - Linksys WAP300N Manual

Hide thumbs Also See for WAP300N:

Step 3: Use an Ethernet cable to connect WAP300N's Ethernet port to the Ethernet/LAN port of your

wired device that would like to access the wireless network.

Wireless Range Extender Mode

In this mode, this device wirelessly extends the range of an existing wireless network. At the same time,

it also adds wireless networking capability to any wired (Ethernet-capable) device (e.g. game console,

media player, DVR, smart TV or network access storage).

If you would like to use WAP300N in this mode,

Step 1: Proceed to Setup > Operation Mode and follow the instructions to set the device to this mode.

Step 2: Proceed to Wireless > Wireless Network Site Survey (recommended) or Wireless > Basic

Wireless Settings, and follow the instructions to configure the basic wireless settings.

Step 3: Place WAP300N in between your existing wireless router and the wireless devices that originally

have difficulty of connecting to your wireless router due to weak wireless signal. For the best

positioning of WAP300N in Wireless Range Extender mode, you may need to test it in multiple locations.

Wireless Bridge Mode

Table of Contents