Advertisement
WPA Personal
WEP
Wireless > Basic Wireless Settings
(Wireless Range Extender Mode)
In WRE mode, ...
(1) Basic Wireless Settings page (both WPS view and Manual view) looks like what is in WMC mode if
WAP300N has not connected to a wireless router yet. Thus, you may re-use the text in WMC mode.
Encryption
Key 1
Authentication
your wireless router (or access point). It must
have 8-63 characters. Also support 64 hex.
Select a level of WEP encryption, 40 / 64-bit (10
hex digits) or 104 / 128-bit (26 hex digits).
Enter the WEP key of your network. Key 1 is
the transmit key used by this device.
The default is Auto, which allows either Open
system or Shared Key authentication to be
used. Select Open to use open system
authentication; the sender and recipient do not
use a WEP key for authentication. Select Shared
to use shared key authentication; the sender
and recipient use a WEP key for authentication.
No option for authentication change.
Advertisement
