3.1
Enclosure section
3.1.1 Removing the top cover
(See Fig.1)
(1) Remove four screws A retaining the top cover from both
side.
(2) Remove two screws B retaining the top cover from the
back side.
(3) To remove the top cover, slide in direction of arrow and lift
away (refer to Fig.1).
3.1.2 Removing the front panel assembly
(See Fig.2, 3)
(1) Remove the top cover as described in above.
(2) Remove the three screws C retaining the front panel as-
sembly from bottom side.
(3) Release the front panel assembly from two pawls in the
front and bottom sides and draw it to the front side.
(4) Disconnect all connectors between the mechanism assem-
bly, front panel assembly and main board.
SECTION 3
DISASSEMBLY
A
C
Top cover
B
Fig.1
Front panel assembly
Pawl
Pawl
C
Fig.2
Pull 2
Pull 2
Push 1
Push up with a screwdriver, etc. 1
Fig.3
A
B
M
C
(No.MB061)1-5