Table of Contents
Advertisement
EA Technology UltraTEV Plus
5.1
Charging the UltraTEV Plus
The UltraTEV Plus² charges via the Micro USB port on the base of the instrument. The
UltraTEV Plus² can be charged from the supplied mains or in-car charger or from a standard
USB port.
The level of charge is indicated in the top right hand corner of the notification bar during
operation. During charging with the instrument switched off, the charge status is indicated
via the charging indicator LED on the base of the instrument.
When the battery is being charged, the charging indicator turns
When the battery is fully charged, the charging indicator turns
For the quickest charging time, turn off the UltraTEV Plus
during charging. Charging time is extended when connected to a USB port
compared to the mains charger.
The TEV/Cable PD and Ultrasonic measuring features are automatically
disabled when the instrument is being charged.
A fully-charged battery should provide approximately 6 hours of continuous
use while switched on and measuring.
charged battery should last a full day of surveying.
5.2
Turning the UltraTEV Plus² On/Off
Press and hold the Home Button
The UltraTEV Plus
2
main menu after a few seconds.
To turn off the UltraTEV Plus
off and the instrument will power down.
Operating Manual
2
for 1 second to turn on the UltraTEV Plus
will boot displaying the EA Technology logo before proceeding to the
, hold the Home button
2
2
For practical purposes, a fully
for 2 seconds, the screen will go
Page 8 of 66
2388L015
Amber
Green
instrument
2
.
2
Advertisement
Table of Contents
