Measuring Ultrasonic Using The Flexi Probe Sensor Accessory - EA Technology UltraTEV Plus2 Operating Manual

EA Technology UltraTEV Plus Operating Manual 2388L015
2

8.3.3 Measuring Ultrasonic using the Flexi Probe sensor Accessory

The Flexible Sensor provides a means of reaching inaccessible parts on the switchgear. The
sensor is mounted at the end of a flexible goose-neck which allows the angle of the sensor
to the handle to be adjusted. This allows the user to make measurements where it would
be difficult to use the built in sensor and still be able to read the display.
To use a Flexible Sensor the connector must be plugged into the external sensor input on
the Ultrasonic Accessory port of the UltraTEV Plus². To avoid damage to the socket or
connector ensure that the red dots are lined up before attempting to plug in the Flexible
Sensor. The Flexible Sensor is used in the same manner as the Internal Sensor.
Page 52 of 66