Table of Contents
Advertisement
EA Technology UltraTEV Plus
switchgear and conditions. The form field can be populated using the inbuilt virtual
keyboard or a drop down list of available options.
The Notification bar changes from blue to green to indicate a survey is
currently running as shown above
6.2
Ad-hoc Measurement
If a survey is not in progress when the record button is pressed in any of the TEV, Cable PD
or Ultrasonic measurement screens the data is still captured. On completion of the record,
the default survey information fields are displayed to capture the measurement context
data. This data is the same as entered when starting a survey through the menu icon. Once
this information has been entered, survey mode stays active ready for further data to be
recorded and added to the survey.
6.3
Survey Metadata Forms
As mentioned in the previous section, each survey requires the input of information about
the substation the survey is being conducted in. Some fields have populated lists of values
to select from, with each having the option to override by inputting a custom value, others
allow only virtual keyboard input and a select few have special behaviours.
Navigation through the forms is done using the left and right buttons on the menu bar or
using the corresponding physical buttons. The last form to be populated is indicated by
the right hand button on the menu bar changing to become a tick icon. Pressing this will
close the last form, save the entered information and return to the home menu ready to
start recording data.
If a workflow is not being used, the default form fields used are set out below along with
their behaviour:
Form
1
Name
Job
Field
Description
Job Number
The job number of the survey, used by
many users to link a survey to a contract
or package of work
Operating Manual
2
Page 36 of 66
Behaviour
Pressing the input field will show
the virtual keyboard
2388L015
Advertisement
Table of Contents
