Folder Change When Using Playlists; Creating Playlists; Selecting The Line Out Signal - K.M.E. Versio VL340 Operation Manual

5.1.8 Folder change when using playlists

If you trigger a folder change while a playlist is active the next folder starting from the path of the
playlist is being accessed. This way you may skip the remaining playlist items.

5.1.9 Creating playlists

When creating playlists please make sure the path destinations match the actual folder structure
of your USB storage device. Otherwise the playlist items will not be found.
Path destinations can be defined relative, e.g.
01 Artist - Title 05.mp3
or absolute, e.g.
Music\Favorites\01 Artist - Title 05.mp3
Should you wish to move playlists to another folder or rename folders, bear in mind that
if relative path definition is used, the playlist needs to be moved together with its audio files
•
and sub folders
if absolute path definition is used the playlist may be freely moved but requires leaving the
•
audio files at the same location.
For simplicity reasons we recommend using relative path definitions and the unified storage of
both playlist and its associated audio files.

5.2 Selecting the Line Out signal

With the selectable Line Out signal you may for example easily build monitor arrangements with
multiple speaker units. In illustration 4.15 below the available signal combinations are shown.
The routing matrix offers the following signal combinations:
signal(s)
green
CH 1
yellow
CH 1 + CH 2
red
SPLIT L / R
off
MASTER POST
Illustration 4.15: Routing matrix
routing selector
Line-Out
26