Table of Contents
Advertisement
4.2.2 Button Lock
All mode buttons (labeled (2), (5), (8) in Illustration 2.2) can be locked to prevent undesired opera-
tion. To enable or disable the lock hold buttons (5) and (8) pressed until Channel 1 mode button
will light up again. By flashing following status information is displayed:
Locked
•
all buttons will flash red
Unlocking
•
all buttons will flash green
INSTRUMENT/LINE
II
I
III
MIC / LINE
LINE
CHANNEL 2
I
II
III
CONNECTION HELP
a
r
r
MIC
Illustration 4.2: Locking / unlocking the buttons
4.2.3 Automatic operating state storage
The VL3x0 will store the currently set input modes and the playback position of the USB Player
which makes setting these modes again after a power on / off cycle or power loss superfluous.
Precaution is demanded in case of enabled Phantom Power!
As the Phantom Power state is also affected by the operating state storage, you should always
ensure - before switching on - there is no equipment connected to Channel 1 XLR that might be
damaged by applying Phantom Power! Please consult the manufacturers documentation as to
whether your equipment will tolerate Phantom Power.
G
:
MIC
G
Y
:
A-GIT
Y
R
:
E-GIT
R
-
:
LINE / OTHER
-
LINE OUT
:
LINK CH 1
:
LINK CH 1+CH 2
:
SPLIT L/R
:
MASTER POST
11
Advertisement
Table of Contents
