Table of Contents
Advertisement
4.2 General Information
4.2.1 Handling the tiltable flange
Caution! Wrong handling may result in contusion of your fingers. Please observe the following
advice.
correct
wrong
Illustration 4.1: Speaker stand insertion
Slightly raise the speaker as shown in Illustration 4.1, this will enable you to align the angle.
Take care: if lifted to high, the speaker will be taken out of the flange and thus be loosened!
After lowering the speaker down ensure the flange locks in place. The angle is adjustable to + / -
20 degrees in 4°- steps.
10
Advertisement
Table of Contents
