Table of Contents
Advertisement
Connection possibilities and input modes
This section explains the modes and properties of the individual channels.
Channel 1
Mode „MIC"
•
→ Suitable for microphones and low level sources
This mode offers a maximum gain of 50 dB which can be set via the channel volume control.
Mode „P48" (Phantom Power)
•
→ For use with microphones and components that require Phantom Power, e. g.
condenser microphones and active DI-Boxes.
Similarly, the maximum gain is 50 dB.
To switch on P48: Hold down the mode button (2) of channel 1 until it lights up red.
•
To switch off P48: repeat the last described action.
•
Phantom Power
To avoid unintended activation of the phantom supply it can only be enabled and disabled by long
button press.
Mode „LINE"
•
→ Suitable for Line sources
This will set the input sensitivity to the typical line-level of 0 dBu (0,775V
imum possible gain is 10 dB.
respectively). Max-
rms
14
Advertisement
Table of Contents
