Page 1
WEATHER STATION Indoor and outdoor temperature with Minimum and Maximum records Weather tendency indicator and weather icons INTRODUCTION: Can receive up to three Outdoor transmitters Table standing or wall mountable (detachable table stand) Congratulations on purchasing this innovative 433MHz Weather Station which displays the weather forecast, time, indoor temperature, and up to three outdoor temperature readings.
First, insert 2 x AA, IEC LR6, 1.5V batteries into the Weather Station. Once the batteries are in place, all If after 10 minutes the DCF time has not been received, use the SET key to manually enter a time initially. The segments of the LCD will light up briefly.
USING THE WEATHER STATION: Weather Tendency WEATHER FORECAST AND WEATHER ICONS: Indicator The weather forecast and icons can display three weather symbols and two weather tendency indicators in forms of Weather Icon an arrow. The arrows will change their appearance depending on the air pressure development. INDOOR TEMPERATURE: Time The indoor temperature is displayed on the third line of the LCD under the time.
Page 4
MINIMUM AND MAXIMUM OUTDOOR TEMPERATURE READING: By pressing the “MIN/MAX” key the current outdoor temperature will alternate between the maximum, minimum and current temperature recordings. Once a new outdoor temperature high or low is reached, it will automatically be set into the Weather Station’s memory.
pressure when really it is due to the slight change of altitude. Again, disregard weather forecasts for the next 12 to 24 Neighbors using electrical products operating on the 433 MHz signal can also cause interference. In most hours, as this will allow time for operation at a constant altitude. severe cases, the reception is only possible once all other electrical products using the 433 MHz are switched off.
Fix a screw into the desired wall, leaving the head extended out by about 5mm. CARE AND MAINTENANCE: Using the Weather Station’s hanging hole, carefully hang it onto the screw. Avoid placing the units in areas prone to vibration and shock as these may cause damage. Avoid areas where the units can be exposed to sudden changes in temperature, i.e.
LIABILITY DISCLAIMER: The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences that occur should an inaccurate reading take place. This product is designed for use in the home only as indication of the temperature. This product is not to be used for medical purposes or for public information.
Need help?
Do you have a question about the WS-7108 and is the answer not in the manual?
Questions and answers