Mitsubishi Electric MELSEC iQ-F Reference page 43

■Public label
No. Variable name Name
(11) pbi_uConstantLinkS Constant link scan
canTime time
(12) pbi_uIpAddress Upper 2 digits of IP
address
(13) pbi_bNetworkConfig Presence of network
urationSetFlg configuration setting
data
(14) pbi_bReservedStatio Presence of reserved
nSetFlg station specification
data
(15) pbi_bErrInvalidStatio Presence of error
nSetFlg invalid station setting
data
(16) pbi_bSubMaseterSet Presence of
submaster function
(17) pbi_bIP_PacketTran Presence of IP packet
sferFlg transfer function
(18) pbi_bDatalinkFaulty Data link faulty station
StationSet setting
(19) pbi_bCPU_StopOutp Output setting for
utSet CPU STOP
(20) pbi_bCPU_StopErrO Output setting for
utputSet CPU stop error
(21) pbi_bLinkScanMode Link scan mode
Set setting
(22) pbi_bTopologySet Network topology
setting
(23) pbi_bMasterReturnS Master station return
et time operation setting
(24) pbi_bSubMasterOpe Submaster station
rateParam parameter operation
setting
Data type Range

Word [unsigned]
Word [unsigned] 

Bit
Bit 

Bit
Bit 

Bit
Bit ON, OFF
Bit ON, OFF
Bit ON, OFF

Bit
Bit 

Bit
Bit 
Description
This label is not used in the FB program and does not
need to be set.
Specify whether to hold or clear the input data from a
data link faulty station.
OFF: clear
ON: hold
Specify whether to hold or clear the output data when
the operating status of a CPU module is STOP.
OFF: hold
ON: clear
Specify whether to hold or clear the output data when
the operating status of a CPU module is STOP.
OFF: clear
ON: hold
This label is not used in the FB program and does not
need to be set.
3 CC-LINK IE FIELD NETWORK MODULE FB
3.5 M+FX5CCLIEF_SetParameter
3
41