Pakedge WK-1-O Quick Start Manual page 9

Using Windows 10
1 Under Control Panel, Network and
Internet, click View Network Status
and Tasks.
2 On the left panel, click Change
Adapter Settings, right-click
Local Area Connection, then click
Properties.
3 Select Internet Protocol Version 4
(TCP/IPv4), then click Properties.
4 Select Use the Following IP Address
and enter the following information:
IP address: 192.168.1.10
Subnet mask: 255.255.255.0
5 Additional settings can be left blank.
6 Click OK, then Close.
9