Replacing Starter Rope And Rewind Spring - Stihl 036 QS Instruction Manual

5HSODFLQJ 6WDUWHU 5RSH DQG
5HZLQG 6SULQJ
•
Remove four screws.
•
Push the hand guard upward.
•
Pull underside of fan housing away
from crankcase and remove it
downward
 46
1
2
3
•
Use screwdriver or suitable pliers
to carefully remove spring clip 
from the starter post.
•
Now remove the rope rotor with
washer  and pawls  .
3
•
Use a screwdriver to pry the rope
out of the starter grip.
•
Remove remaining rope from the
rotor and starter grip.
•
Thread the new rope -
Part No. 1122 190 2900 -
through the top of the starter grip
and then pull through the rope
guide bush  .
4