Timing Requirement - Philips 227E3QPHSU/27 Service Manual

Meridian 3
84
Pin Assignment:
Pin
1
2
3
4
5
6
7
8
9
10
11
12
3.2.3 HDMI Cable
The input signals are applied to the display through HDMI cable.
Length
Connector type
Pin Assignment:
Pin
1
2
3
4
5
6
7
8
9
10

3.3 Timing Requirement

Factory Preset Mode Definition:
a. Perfect FOS while presenting those timings.
b. Will specify those timing in User's Manual
Preset Mode Definition
a. Need to support those timings
b. Perfect FOS after auto adjustment.
Signal Assignment
T.M.D.S. data2-
T.M.D.S. data2+
T.M.D.S. data2 shield
No Connect
No Connect
DDC clock
DDC data
No Connect
T.M.D.S. data1-
T.M.D.S. data1+
T.M.D.S. data1 shield
No Connect
: Please refer to M3 cable bundle summary file
: HDMI male with DDC-2B pin assignments
White connector thumb-operated jackscrews
With transplant pin protective cover.
Signal Assignment
TMDS data2+
TMDS data2 shield
TMDS data2-
TMDS data1+
TMDS data1 shield
TMDS data1-
TMDS data0+
TMDS data0 shield
TMDS data0-
TMDS data ck+
Pin Signal Assignment
13 No Connect
14 +5V Power
15 Ground (for +5V)
16 Hot plug detect
17 T.M.D.S. data0-
18 T.M.D.S. data0+
19 T.M.D.S. data0 shield
20 No Connect
21 No Connect
22 T.M.D.S clock shield
23 T.M.D.S. clock+
24 T.M.D.S. clock-
Pin Signal Assignment
11 TMDS data c shield
12 TMDS data ck-
13 CEC
Reserved (HDMI 1.0-1.3c), HEC Data- (Optional,
14
HDMI 1.4+ with Ethernet)
15
SCL (I²C Serial Clock for DDC)
16 SDA (I²C Serial Data Line for DDC)
17
DDC/CEC/HEC Ground
18
+5 V Power (max 50 mA)
Hot Plug Detect (All versions) and HEC Data+
19
(Optional, HDMI 1.4+ with Ethernet)