Interface - Philips 227E3QPHSU/27 Service Manual

d) Display Port (option, refer to Quick specification table)
Follow Display Port 1.1 specification
e) USB Hub 2.0 (option, refer to Quick specification table)
USB port (1 upstream, 2 or 4 downstream)
f) Audio in (option, refer to Quick specification table)
Input signal: 1Vrms
Loudspeaker: stereo of RMS Power
Frequency range: (WAIT FOR SUPPLIER INPUT)
Headphone connection will mute speaker
g) USB PLUG (option, refer to Quick specification table)
USB port (1 upstream, 1 downstream), black jack color)
h) HDMI audio out (headphone): (option, refer to Quick specification table)
Stereo, > 50mVrms for headphone of 32

3.2 Interface

3.2.1 D-Sub Cable
Length
Connector type : D-Sub male with DDC2B pin assignments.
Pin assignments:
Pin
1
2
3
4
5
6
7
8
3.2.2 DVI Cable
The input signals are applied to the display through DVI-D cable.
Length
Connector type
: Please refer to M3 cable bundle summary file
Fix with monitor when packing, with transplant pin protective cover.
Blue connector thumb-operated jack screws
Signal Assignment
Red
Green / SOG
Blue
Sense (GND)
Cable Detected (GND)
Red GND
Green GND
Blue GND
: Please refer to M3 cable bundle summary file
: DVI-D male with DDC-2B pin assignments
White connector thumb-operated jackscrews
With transplant pin protective cover.
Pin Signal Assignment
9 DDC +3.3V or +5V
10 Logic GND
11 Sense (GND)
12 Bi-directional data
13 H /H+V sync
14 V-sync
15 Data clock
Meridian 3
83