Philips 227E3QPHSU/27 Service Manual page 54

Meridian 3
54
6. Click the "Program" to start programming after monitor power on. When it shows "Analog: PASS!, SN write OK!,
DVI: PASS! and HDMI: PASS!". The EDID and SN writing process are finished.
13.5 Check the SN
1. Connect the video source and power on monitor.
2. Press the "MENU" button to enter the user menu, and then check the 14 digital SN.
3. If this SN number is the same as what we had written by EDID tool, the EDID and SN writing is completed finally