Humminbird 700 Series Installation & Operation Manual page 8

Control Heads
(2) 700 Series™ Units
(1) 700 Series™ Unit &
(1) 800/900/1100 Series™ Unit
(2) 800, 900, or 1100 Series™ Units
NOTE: The AS EC [length]E cable is available in a variety of lengths. T
Connect the Control Heads
1. Confirm that the control heads are powered off.
2. To install the Ethernet cables, see the connection information for
your network configuration as follows:
• Two 700 Series™ Units: see Section A.
• One 700 Series™ Unit & One 800/900/1100 Series™ Unit:
see Section B.
• Two 800, 900, or 1100 Series™ Units: see Section C.
NOTE: The AS EC [length]E cable is available in a variety of lengths. The following
instructions use AS EC 10E, but your cable part number may be different.
NOTE: You may need to consult your control head installation guide for details.
Ethernet Cable Information
Required Cables
(2) AS EC QDE & (1) AS EC [length]E
(1) AS EC QDE & (1) AS EC [length]E
(1) AS EC [length]E
3
Installation