HP 16500B User Manual page 106

If You Have a Problem
Erratic trace measurements
q
Try doing a full reset of the target system before beginning the
measurement.
Some preprocessor designs require a full reset to ensure correct
configuration.
q
Ensure that your target system meets the timing requirements of the
processor with the preprocessor probe installed.
See "Capacitive Loading" in this chapter. While preprocessor loading is slight,
pin protectors, extenders, and adapters may increase it to unacceptable
levels. If the target system design has poor timing margins, such loading may
cause incorrect processor functioning, giving erratic trace results.
q
Ensure that you have sufficient cooling for the preprocessor probe.
Current processors such as the i486, Pentium™, and MC68040 generate
substantial heat. This is exacerbated by the active circuitry on the
preprocessor board. You should ensure that you have ambient temperature
conditions and airflow that meet or exceed the requirements of the
microprocessor manufacturer.
58