HP 16500B User Manual page 61

You can use the Mixed Display feature in the state analyzer menus to show
both waveforms and trace lists in the same display, making it easier to correlate
the events of interest.
If you are using mixed display as part of a group run, you may need to adjust
intermodule skew to ensure proper time correlation and display results.
Mixed Display using the HP 16550A and HP 16532A
See Also
X and O markers from
the waveform display
are shown in their
relative position on the
state display.
"To set up a group run of modules within the HP 16500B" in this chapter.
"Skew Adjustment" in this chapter.
Intermodule Measurements
To view trace lists and waveforms together on the same
225