Pioneer PRV-LX10 Operating Instructions Manual page 92

Message Display
Item
Backup / Restore Cannot restore the current project.
Backup / Restore Do you really want to overwrite *****
Backup / Restore Does it overwrite all files when the same file
exists ?
Backup / Restore Not enough space in HDD.
Backup / Restore Backup failed.
Backup / Restore Restore failed.
Backup / Restore There is saved parameter file. Do you want to
overwrite?
Backup / Restore Do you really want to restore system settings.
Backup / Restore This PROJECT is protected.
Backup / Restore No data to restore.
Backup / Restore Illegal data to restore.
Backup / Restore Load error.
Delete Delete failed.
Unfinalize Menu Data is lost after unfinalization.
Unfinalize Cannot be unfinalized.
Unfinalize Disc unfinalization failed.
7 Messages Displayed in Dialogue Box or Main Unit Display during Recording Operation
Item
REC HDD_CAPA is not enough.
DVD_CAPA is not enough.
This disc is not writable.
There is no disc.
The number of titles is 99.
No SDI_V Input.
No SDI_A Input.
No AES/EBU Input.
No DV Input.
Copy Protection
ENCODER ERROR********
DRIVE ERROR******
The number of clips is 255.
92
PRV-LX10
En
Message
Restore was attempted for the current project. A current project
cannot be restored.
The ****** file is overwritten.
All files with the same name are overwritten. Select "No" do
display a dialog when there are files with the same name.
No free space left on the hard disk.
Free up space on the internal hard disk or USB HDD.
The backup attempt failed. Either try again, or check for
problems on the USB hard disk.
The restore attempt failed. Either try again, or check for
problems on the USB hard disk.
This parameter has already been set. Press [Yes] if you wish
to overwrite the previous setting.
Press [Yes] to overwrite (erase) present system settings.
The target project has been set to protect against erasure, so
cannot overwrite restore.
No data exists to restore.
The data to be restored is faulty.
The data to be restored could not be loaded successfully.
Failed attempt to delete. Either try again or check for problems
on the USB hard disk.
The DVD menu information is lost when a disc is canceled
finalization.
Finalization cannot be undone. (Finalization on discs other than
DVD-RW discs created on the PRV-LX10 cannot be undone.)
Failed attempt to unfinalize the disc. Disc may have problems.
Message
The hard disk drive has insufficient open capacity. Erase a
project, to open enough space on the hard disk drive for the
recording.
The DVD disc has insufficient remaining capacity.
The DVD disc cannot be written to.
No disc has been loaded.
This disc has 99 titles recorded; no additional titles can be
recorded.
There is no SDI Video signal input.
There is no SDI Audio signal input.
There is no AES/EBU signal input.
There is no DV signal input.
The input signal has been copy protected; copying is not pos-
sible.
An encode error occurred. Reboot the system.(******** in-
dicates the error code.)
A drive error occurred. A drive fault may have occurred.
There are 255 project clips. The maximum number of clips in
a project is 255.
Comment
Comment