Title Order Edit; Dvd Disc Emulation - Pioneer PRV-LX10 Operating Instructions Manual

While playing back the selected clip, use the
SELECT button on the displayed control bar to
designate the point at which you wish to divide the
clip. Clip division will begin when the SAVE button is
pressed, and when completed, the display will return
to the Function Menu. If the CANCEL button is
pressed instead, the clip division will be canceled
and the display will return to the Function Menu.
When beginning the division, you may select
whether to overwrite the divided clip, or save it as a
new clip. When dividing a clip, the hard disk drive
must have available space exceeding the size of the
clip before division. When a clip is divided, a "1-"
and "2-" will be affixed to the heads of the clip
names. If, as a result of affixing the numeral ("1-",
etc.), the clip name exceeds 32 single-byte
characters, the final character of the name will
automatically be deleted so as to keep the name
within the 32-character limit. Following division, if
the pre-edit clip was recorded as a title, the divided
clip will replace it; if the pre-edit clip was not
recorded as a title, the post-edit clip will not be
recorded as a title. A clip cannot be divided if the
disc already holds 99 titles. If necessary, use the
"Title Order Edit" command (see next section) to
delete unnecessary titles before adding new titles.
Clip Divide Point
Play Title / Chapter
OSD during Clip divide
Clip divide
Note 1:
The division point can be set only at the head of a
group of pictures (GOP) (NTSC=15, PAL=12 frame
units).
Note 2:
Once divided, a clip cannot be rejoined.

Title Order Edit

In the DVD-Video format, the number of possible
titles per disc is limited to 99. The projects created
on this recorder, however, are capable of managing
more than that number of clips. Fundamentally, the
title numbers from 1 to 99 correspond to the clips in
the order in which they are recorded, but beyond 99,
the clips are not allocated to titles.
Using the Function Menu's EDIT section = [Title]
= [Title Selection] command, before final recording
on the DVD disc, the clips can be allocated to a title
in an order differing from that in which they were
recorded.
Play Time

DVD Disc Emulation

The DVD disc emulation allows you to confirm the
results of editing before recording those results to
the final DVD disc. When the Disc Emulation button
on the EDIT section = [Title] command is pressed,
DVD menu editing, title editing and other editing
results can be played back in the same form as they
Total Title Time
would be recorded on DVD disc. Following playback,
the screen returns to the Function Menu.
When the FUNCTION button is pressed, the
display returns to the Function Menu.
Title Editing / Chapter Editing
EDIT section = [Title] = [Title Selection]
Executing the Disc Emulation command on EDIT
section = [Title]
65
PRV-LX10
En