Pioneer PRV-LX10 Operating Instructions Manual page 21

2 Press the remote control unit's SETUP button
SETUP
3 Using the mouse to display and access the
playback control bar.
Control bar
Press the FUNCTION button
Move the mouse cursor
over the FUNCTION
button and click the
mouse's left button.
STOP PLAY
REPEAT DISPLAY PAUSE
RPT A-B STEP
AUDIO SCAN
ANGLE SUBTITLE PREV NEXT
MENU
TOP
ENTER
MENU
SETUP
1 2 3 RETURN
TITLE/CHP
4 5 6
FRM/TIME
7 8 9 FRM/TIME
>
0 10 CLEAR SEARCH
DXX2527
Press both right and
left mouse buttons
simultaneously.
Control bar is displayed.
Basic PRV-LX10 Operations
4 Access from the Keyboard by Assigning a
Function key.
Use main unit setting to assign
FUNCTION button to F1 key.
7 To Exit the Function Menu
Use either of the following methods:
1 Press the Exit button found on any of the sub-
menus (move mouse cursor over the Exit button
and press the left mouse button).
2 Press the main unit's front panel FUNCTION
button.
3 Press the remote control unit's SETUP button.
4 Click the right button on the mouse
5 If the Function Menu has been assigned to a
function key on the keyboard, press that key.
Note 6:
Use of the mouse's right button to exit the Function Menu
is supported only during display of the top menu.
7 Control Bar
The control bar is displayed by pressing the mouse's
right and left buttons simultaneously. When the
control bar is displayed, pressing the mouse's right
and left buttons once again will cause the control bar
to be hidden. When the mouse cursor is moved over
the control bar, the cursor pointer arrow
to a hand . When the hand
be used to perform the same operations available
with the remote control unit; move the hand over the
desired item and select by clicking the left mouse
button.
The position of the control bar can be changed by
placing the mouse cursor on the left edge and
dragging.
(Note 7)
Note 7:
The movable range of the control bar is limited to that area
not overlapping the OSD display. Also, the new location of
the control bar is preserved until the Function Menu is
displayed.
Function Menu
appears when F1
key is pressed.
(Note 6) .
changes
is displayed, it can
21
PRV-LX10
En