Project Editing - Pioneer PRV-LX10 Operating Instructions Manual

Project Editing

This recorder manages recorded image data (clips)
by the unit of "project." A single project can
preserve multiple clips, and so long as the project is
not changed, the numerous clips are preserved as a
continuous series within the project.
It is possible to include both PAL and NTSC clips
within a single project. In order to discriminate the
different modes, an [P] or [N] is affixed to the head
of list displays containing clips, or projects containing
clips, that differ from the currently selected TV
system. This display is used only for discriminating
the two kinds, however, and is not reflected in the
actual file names (during menu creation, etc.).
[N] project exists on the STATUS section's [Project] menu
[N] clip exists on the EDIT section's [Title]
= [Target Clip] = [Edit To (HDD)] menu
The Function Menu's EDIT section = [Project] =
[Record/Name] command can be used to confirm
the number of clips, the project size, and the number
of titles within the currently selected project.
Further, when a keyboard is connected, the EDIT
section = [Project] = [Record/Name] = [Name]
command can be used to change the name of the
currently selected project.
EDIT section = [Project] = [Record/Name]
Changing project name on EDIT section
= [Project] = [Record/Name] = [Name]
Note 1:
To change project names, connect a keyboard to the
MOUSE/KEYBOARD USB jack.
The [Protect] command allows locking of the clips
within a project to prevent deletion.
Setting project clips protection on EDIT section
= [Project] = [Record/Name] = [Protect]
67
PRV-LX10
En