Pioneer PRV-LX1 Quick Start

Pioneer prv-lx1: quick start

Hide thumbs Also See for PRV-LX1:

Download this manual See also: Maintenance, Training Manual

(Commands using the front panel appear in bold text while Function menu commands appear in bold-italics)

Set Up the PRV-LX1

Connect the PRV-LX1 to a source

device as shown below. For ease of

use, add a monitoring screen to each

device.

The example (right) shows the setup

for Composite Video with RCA Audio.

Select the Recording Inputs & Parameters

To record material from a source device

directly to disc, select a target. Press the

Function button on the PRV-LX1's front

panel. Using the arrow buttons to highlight

Drive in the Status window. Continue using

the arrow buttons to highlight DVD1 in the

Drive submenu and press Enter until an

orange box ( ) appears next to the drive.

Insert a blank DVD disc into the drive.

Note: Another option is to use the front panel to

select DVD1 as the target. If the unit is not already

set to DVD1, press the Drive Select button until

the indicator under DVD1 is lit.

Although the hardware is connected for

Composite, the Video Input source must also

be set to Composite. From the Function

menu, highlight V Input from the Status

window then press Enter. Arrow right to

highlight Composite then press Enter so that

the option is marked with an orange box ( ).

PRV-LX1_QuickStart.doc

PRV-LX1 Quick Start

Page 1 of 5

Page 1 (Commands using the front panel appear in bold text while Function menu commands appear in bold-italics) Set Up the PRV-LX1 Connect the PRV-LX1 to a source device as shown below. For ease of use, add a monitoring screen to each device.
Page 2 Using the arrow buttons on the front panel, highlight A Input then press Enter. Verify that RCA is highlighted then press Enter to select that option. An orange box ( ) appears next to RCA. Note: Settings are automatically saved to the recorder until an option is changed.
Page 3 Record Your Video Once the encode rates are set, record the video to the disc in DVD1. Function button to exit the Function menu. Press the Record button on the front panel or the remote control to capture video from the source device as a recording session.
Page 4 Preview button to view the new menu. To return to the Function menu from DVD Menu preview, hit the Function button on the PRV-LX1 front panel or the Setup button on the remote control. Burn & Finalize the Disc Arrow left and down to the Back button then press the Enter button.
Page 5 Finalization times vary depending upon the amount of material being burned to the disc. The drive tray automatically opens when the finalization process is complete. PRV-LX1_QuickStart.doc Page 5 of 5...