Getting Started; Switching On And Setting Up - Pioneer DVR-440H-S Operating Instructions Manual

Getting started

Chapter 4
Getting started

Switching on and setting up

When you switch the recorder on for the first
time, you can make several basic settings
using the Setup Navigator feature. This takes
you through setting the clock, the internal TV
tuner and the video output.
If you're using the recorder for the first time,
we strongly recommend you use the Setup
Navigator before starting to use the
recorder.
1 Switch on your TV and set the video
input to this recorder.
STANDBY/ON
2 Switch on the recorder.
When you switch on for the first time, your
TV should display the Setup Navigator
screen (If the Setup Navigator doesn't
appear, you can also access it from the
Initial Setup menu; see page 116).
• If this recorder is connected to a
compatible TV using a fully-wired 21-pin
SCART cable, the recorder will take a few
seconds to download country, TV screen
size and language information. (Check
the manual that came with your TV for
compatibility information.)
ENTER
3 Choose a language (then
press ENTER).
Initial Setup
Basic Basic Clock Setting Language
Tuner Input Line System
Video In/ O ut Pow er Save
Audio In Help
Audio O ut Setup N avig ator Setup N avig ator
Language
Re cording
Playback
4 Start the Setup Navigator.
ENTER
k Setting
Complete this setup before you
t Line System
start using your recorder.
er Save
Start Start
P
Cancel
p Navigator p Navigator
Please use the Initial Setup if you
want to make more detailed settings.
• If you don't want to use the Setup
Navigator, press
then press ENTER to exit the Setup
Navigator.
ENTER
5 Select the Auto Channel
Setting ('Auto Scan' or 'Download from
TV'), or 'Do not set'.
k Setting Auto Channel Setting
Line System
er Save Auto Scan English
P Download from TV
p Navigator p Navigator Do not Set
to select Cancel,
04
29
En