Connecting To An Av Amplifier/Receiver - Pioneer DVR-440H-S Operating Instructions Manual

02
Connecting up
Connecting to an AV
amplifier/receiver
To enjoy multichannel surround sound you
need to connect this recorder to an AV
amplifier/receiver using the digital coaxial
output.
In addition to a digital connection, we
recommend also connecting using the
stereo analog connection for compatibility
with all discs and sources.
You'll probably also want to connect a video
output to your AV amplifier/receiver. Use the
ordinary video output (as shown here), or the
S-video output.
Important
• Noise may be output from your speakers
if the recorder is not set up to work with
your AV amplifier/receiver properly (see
Audio Out on page 120).
• Do not connect this recorder to your TV
'through' your VCR using A/V cables.
Always connect it directly to your TV.
22
En
TV
VIDEO
AUDIO/VIDEO
OUT
IN
3
AV amp/
receiver
AV 1 (RGB) – TV
Y
AC IN
P
B
OUTPUT
DIGITAL
CONTROL
OUT R
P
R
COAXIAL IN G-LINK COMPONENT AUDIO
VIDEO OUT
1 Connect RF antenna cables as shown.
This enables you to watch and record TV
channels.
2 Connect one of the DIGITAL OUT
COAXIAL jack on this recorder to an
coaxial digital input on your AV
amplifier/receiver.
This enables you to listen to multichannel
surround sound.
3 Connect the analog AUDIO OUTPUT
and VIDEO OUTPUT jacks on this recorder
to an analog audio and video input on
your AV amplifier/receiver.
4 Connect the AV amplifier/receiver's
video output to a video input on your TV.
ANTENNA
IN
VIDEO
IN
4
1
DIGITAL
IN
2
ANTENNA
IN (RF IN)
AV 2 (INPUT 1/DECODER)
IN
L
OUT
ANTENNA
VIDEO
S-VIDEO
ANTENNA
OUT
1
Antenna/cable TV
wall outlet