On-Screen Displays And Recorder Displays - Pioneer DVR-440H-S Operating Instructions Manual

Additional information
Problem
The picture freezes and
the front panel and
remote control buttons
stop working
If the unit does not operate normally due to external effects such as static electricity, disconnect
the power plug from the outlet and insert again to return to normal operating conditions.

On-screen displays and recorder displays

The table below shows a list of error messages that you may encounter when using the
recorder and an explanation of their meaning.
Message
• Initializing disc. Please wait a
moment.
• Incompatible region number.
• Cannot record any more titles.
• No more space for file management
data.
• This disc cannot be recorded. Undo
the finalization.
• Cannot play this disc.
• This disc cannot be recorded.
• Cannot read the CPRM information.
• Could not record the information to
the disc.
• Cannot edit.
• Could not initialize disc.
• Could not complete finalization
successfully.
• Could not undo finalization
successfully.
• Could not successfully unlock the
disc.
Remedy
• Press STOP then try restarting playback.
• Press the front panel
off, then switch back on and restart playback. If the power fails to
switch off, press and hold
power switches off.
Explanation/Action
When you load a blank DVD-RW or DVD+RW disc,
the recorder automatically initializes it.
The disc loaded has an incompatible region
number for the recorder and so will not play.
The disc control data limit has been reached, or
the maximum number of chapters and/or titles
has been reached. Erase titles/chapters or
combine chapters.
The disc was finalized on a non-Pioneer DVD
recorder. Undo the finalization in order to
recording/editing.
The disc may be dirty or damaged. Take out the
disc, clean it and retry. If the error persists, use a
new disc. If the error appears even with a new disc,
please consult a Pioneer Service Center.
STANDBY/ON button to switch the power
STANDBY/ON for 5 seconds until the
15
135
En