Connecting To An Av Amplifier/Receiver - Pioneer DVR-54HX-S Operating Instructions And Owner's Manual

Connecting up
Connecting to an AV
amplifier/receiver
To enjoy multichannel surround sound you
need to connect this recorder to an AV
amplifier/receiver using the digital coaxial
output.
In addition to a digital connection, we
recommend also connecting using the
stereo analog connection for compatibility
with all discs and sources.
You'll probably also want to connect a video
output to your AV amplifier/receiver. Use the
ordinary video output (as shown here), or the
S-video output.
Important
• Noise may be output from your speakers
if the recorder is not set up to work with
your AV amplifier/receiver properly (see
Audio Out on page 143).
• When watching D.TV only linear PCM
audio is output from the coaxial digital
out jack.
• Do not connect this recorder to your TV
'through' your VCR using A/V cables.
Always connect it directly to your TV.
TV
AUDIO/VIDEO
IN
3
COMPONENT
VIDEO OUT
P P
R B
AV 2 (INPUT 1/DECODER)
AC IN OUTPUT
AV 1 (RGB) – TV
R L
AUDIO
1 Connect your TV antenna to the
recorder and TV.
See Connecting a TV antenna on page 16 for
details.
This enables you to watch and record TV
channels.
2 Connect the DIGITAL OUT COAXIAL
jack on this recorder to a coaxial digital
input on your AV amplifier/receiver.
This enables you to listen to multichannel
surround sound.
3 Connect the analog AUDIO OUTPUT
and VIDEO OUTPUT jacks on this recorder
to an analog audio and video input on
your AV amplifier/receiver.
4 Connect the AV amplifier/receiver's
video output to a video input on your TV.
VIDEO
IN
4
VIDEO
OUT
DIGITAL
IN
2
AV amp/receiver
OUT
Y IN
ANTENNA
(DIGITAL)
CONTROL G-LINK
S-VIDEO IN
DIGITAL
AUDIO OUT
IN
OUT
ANTENNA
INPUT3
VIDEO COAXIAL
COMMON INTERFACE
02
23
En