Pioneer DVR-220 Operating Instructions Manual page 49

Recording
Extending a timer recording in progress
You can extend a timer recording beyond the
programmed end time in two different ways. This can be
useful if a broadcast program overruns, for example.
HOME
MENU
PREV NEXT
REC STOP REC
Moving the end time by 30-minute blocks
1 During timer recording, press and hold
three seconds.
The timer indicator disappears from the front panel
display.
2 Press REC repeatedly to extend recording in 30
minute increments.
Programming a new end time
1 During timer recording, press TIMER REC to
display the Timer Recording screen.
You can also access the Timer Recording screen from
the Home Menu (press HOME MENU, select Timer
Recording, then Timer Recording (View)).
Timer Recording
Date Start Stop
12/13 WED 7:00 PM 8:00 PM
New Input
DVD Remain
CLEAR
ENTER
TIMER REC
REC for
CH Mode Confirm
32 SP Recording
1/1
1h00m(FINE)
2 Use the (cursor up) button to highlight the
current timer recording ('Recording' is shown in the
'Confirm' column), then press ENTER.
A screen showing details of the timer recording appears.
From this screen, only the recording stop time can be
changed.
Timer Recording
Date Start
12/12 TUE 10 00 AM
Program Set
3 Set a new Stop time for the timer recording.
Use the (cursor left/right) buttons to select the
hour or minute field, then use the
buttons to change the time.
4 Press ENTER to set the new time and exit the
screen.
Recording will continue until the new stop time is
reached.
Canceling and stopping a timer recording in
progress
After a timer recording has started, you can cancel the
program (but continue recording), or stop recording
completely if you need to.
REC STOP REC
1 During timer recording, press and hold
three seconds.
Only the program is canceled (the timer indicator
disappears); recording continues so that you can
manually stop recording whenever you like.
2 When you want to stop recording completely,
press STOP REC.
Preventing use of the recorder before a
timer recording (child lock)
You can make all the front panel and remote control
buttons inoperative using the child lock feature. This is
useful when you set a timer recording and want to make
sure that the timer settings are not changed before
recording has finished.
Stop CH Rec Mode
11 00 AM 26 SP
Ttl Name Input
(cursor up/down)
REC for
06
49
En