Error Messages; Initial Setting - Pioneer V8000 Command Reference Manual

3.4

Error Messages

If an error occurs during a command execution, the player returns an error
code. The table below lists each code with a description of the error:
Code Message
E00 Communication error
E04 Feature not available
E06 Missing argument
E11 Disc does not exist
E12 Search error
E15 Picture stop
E16 Interrupt by other device
E99 Panic
3.5

Initial Setting

The following table provides the default internal register and switch settings.
Take care when setting the required parameters for an application program.
Register/Switch
Video Switch
Audio Switch
Display Switch
Address mode
Speed Parameter
CCR
Register A
Register D
Description
Communication Line Error due to framing error
or buffer overflow
Non-Usable Function has been tried – either
the command mnemonic is wrong or the
command can not be used in this mode
Correct parameter is not specified
There is no disc in the tray
Search address is missing
Playback has been stopped by VOBU Still while
in the Auto Play mode
The command(s) sent via the serial line were
not executed before commands were sent from
the front panel buttons and/or remote control
Unrecoverable Error occurred – possible that a
disc cannot be loaded and/or playing does not
continue
Setting at Power ON
1 : ON
3 : Audio 1
0 : OFF
1 : Time
15 : 1/4 Speed
3 : Mode 3
3 : Title/Chapter and Frame
Display (DVD)
Track/Time Display (CD, VCD)
0 : CR
- 8
Computer Control