Error Messages; Initial Setting - Pioneer DVD-V7200 Network Manual

3.4

Error Messages

If an error occurs during a command execution, the player returns an error
code. The table below lists each code with a description of the error:
Code Message
E00 Communication error
E04 Feature not available
E06 Missing argument
E11 Disc does not exist
E12 Search error
E15 Picture stop
E16 Interrupt by other device
E99 Panic
3.5

Initial Setting

The following table provides the default internal register and switch settings.
Take care to set each to the required parameters when creating an
application program.
Register/Switch
Key Lock
Video Switch
Audio Switch
Display Switch
Address mode
Speed Parameter
CCR
Register A
Register B
Register D
Description
Communication Line Error due to framing error or
buffer overflow
Non-Usable Function has been tried – either the
command mnemonic is wrong or the command can
not be used in this mode
Correct parameter is not specified
There is no disc in the tray
Search address can not be found
Read error of Text File; (When the command (UU)
is executed)
Playback has been stopped by a picture stop code
while in the Auto Play mode
The command(s) sent via the serial line were not
executed before commands were sent from the
front panel buttons and/or remote control unit
Forced end of the data transfer while Text File
sends to PC (When the command (UU) is
executed)
Unrecoverable Error occurred – possible that a disc
cannot be loaded and/or playing can not continue
Setting at Power ON
2 : If set at 2 at power OFF
0 : All other cases
1 : ON
7 : Audio +1
0 : OFF
1 : Time
30 : ½ Speed
3 : Mode 3
3 : Title/Chapter and Frame
Display (DVD)
Track/Time Display (CD, VCD)
0 : Normal Squelch
0 : CR
- 7 -
DVD-V7200 Upload/Download