Enter Button (Dvd) - Pioneer V8000 Command Reference Manual

If the command is valid for the situation, the player immediately returns
"R<CR>"*.
If there are no buttons on the screen when the command is issued, an error
message (E04) is returned.
*: However, this does not confirm that the command is executed completely.
Execution :
String
2CU<CR>
6.34

Enter Button (DVD)

Function : sets the button and executes
Format : (Integer) ET
Explanation :
CU command with an integer. The player executes the program that is
assigned to that button. This command emulates the "enter" key on the
remote control while the button is on the screen.
If the command is appropriate for the situation, the player returns immediately
"R<CR>"*.
If there are no buttons on the screen when the command is issued, an error
message (E04) is returned.
*: However, this does not confirm that the command is executed completely.
Execution :
String
2CU<CR>
ET<CR>
2
3
4
Status Return
R<CR>
The command fixes the button on the screen after executing the
Status Return
R<CR>
R<CR>
- 71
Down
Left
Right
DVD player
Shows the disc menu
Moves the cursor down
to the next button
DVD player
Shows the disc menu
Moves to the below
button from the prior one
Fixes the selection and
executes the program
that is assigned on it
Operating Modes