Search & Play - Pioneer V8000 Command Reference Manual

command and an error message (E04) is returned. In addition, if the disc
program blocks the Pause command, the player ignores the command.
The DVD-V8000 does not accept other commands during the execution of a
Search command, returning an E04 error message. After issuing a Search
command, wait until the Return (R) status appears before issuing another
command. An exception to this rule is the Mark Frame Play command (i.e.
FR1200PL), when it is unnecessary to wait for the R status before sending
additional commands.
The available address modes are listed below:
Address Mode
FR (Frame)
TM (Time)
CH (Chapter)
TI (Title)
BK(Block)
IX(Index)
TR (Track)
Execution :
String
FR4500SE<CR>
CH5SE<CR>
TR2SE<CR>
5.17 Search & Play
Function : Searches to specified address and starts to play immediately
Format : Address SL
Explanation :
according to the Address. The player then compares the address with the
current address. The pick-up moves so that the difference becomes 0.
The player plays a disc immediately after reaching the specific address. In
case the player misses or fails to locate the address, it returns an error code
(E06 or E12). If Frame is selected in Address Mode, the player ignores the
command.
DVD Video
X
X
X
X
Status Return
R<CR>
R<CR>
R<CR>
The specified address is written into an appropriate register
- 23
DVD VR CD
X X
X
X
X
X
X
DVD player
Play mode
Search to Frame 4500
Still mode (DVD)
Play mode
Search to Chapter 5
Still mode
Play mode
Searches to Track 2
Still mode (VCD)
Operating Modes
VCD
X
X