Search - Pioneer V8000 Command Reference Manual

Explanation :
returns the completed status message.
remains the same.
The speed parameter indicates the number of fields per second. The range is
0 through 90 with a default value of 15. The relationship between the integer,
speed parameter and the actual speed of the player is as follows:
Integer
60
30
15
7
4
1
NOTE: When 'REV STEP/REV PLAY' is set to 'Resolution' in ADV.SETUP,
DVD only offers fixed reverse speeds which varies from about 1/8 to about
1/16 depending on the transfer rate.
NOTE: VCD only offers 1/2 to 1/16 forward speeds. Reverse speed is not
available for VCD. Speeds are approximate values only.
Execution :
String
4SPMF<CR>
30SP<CR>
4SPMR<CR>
5.16

Search

Function : Search to specified address
Format : Address SE
Explanation :
accordance with the current Search address mode.
When the Search command is sent to the player, the specified address is
compared with the current address.
difference becomes 0.
Upon reaching the specified address, the player enters the Pause mode for a
CD or the Still mode for other disc types. The player then returns the
completed status message. If the player misses the specified address or can
not find it, an error message (E06 or E12) is returned. However, if the disc
program disallows a Time, Chapter or Title Search, the player ignores the
The command rewrites the contents of the Speed Register and
Speed Parameter
46~90
23~45
12~22
6~11
3~5
0~2
Status Return
R<CR>
R<CR>
R<CR>
The specified address is written into the Search Register in
- 22
The current mode of the player
Speed
1/1
1/2
1/4
1/8
1/16
STEP1
DVD player
1
Play mode to speed forward
/
16
Multi-Speed to ½ Multi-Speed
Slow speed reverse
The pick-up is moved so that the
Operating Modes