Major Specifications - Cactus V6 IIs User Manual

Wireless flash transceiver

Hide thumbs Also See for V6 IIs:

Table of Contents

Before using your V6 IIs, read the following safety precautions to ensure correct and

safe use:

1. Turn OFF all your equipment (e.g., Cactus units, flash units, cameras, etc.) before

changing batteries or making connections. Observe the correct polarity when

changing batteries. There is a danger of explosion if the batteries are installed

incorrectly.

2. Switch off the transceiver and remove batteries during storage.

3. Do not permanently store the product in a high temperature environment (i.e.,

under strong direct sunlight, near cooking stoves/oven).

4. The Cactus V6 IIs should never be submerged in liquid or exposed to heavy rain

unless it is properly protected.

5. Do not operate the device in the presence of flammable gases or fumes.

6. Do not dissemble.

7. Do not crush and do not expose the V6 IIs to any shock or force such as

hammering, dropping, or stepping on it.

3. Major Specifications

y Working radio frequency: 2445.80-2480.99MHz

y Number of channels: 16

y Number of groups: 4

y Support sync speed up to 1/8,000 second

y High-speed sync modes: Normal HSS, Power Sync

y Maximum effective distance: 100 meters

y Operating temperature: -20°C to +50°C

y Camera voltage handling: up to 6V

y Flash voltage handling: up to 300V

y Dimensions: 72mm (L) x 72mm (W) x 42 mm (H)

y Weight: 84g

y Power input: 2 x AA battery, 3V, 50mA, 0.15W; mini USB 2.0, DC input 5V,

500mA~1A

y Estimated battery life in hours (with LCD backlight on):

Alkaline AA Batteries

1000mAh

Rechargeable NiMH AA

Batteries 2500mAh

Table of Contents