Personalizing The V6 - Cactus V6 IIs User Manual

1. Switch on the V6 IIs in TX mode. Press
SEQUENCE>. Press
2. Turn the selection dial to A-B-C-D or AB-CD and press
3. Depending on the group sequence mode you set, one or two cursors will point to
the group alphabets on the main screen, indicating which group(s) will be f ired
next.
16. Personalizing the V6 IIs
You may configure a number of personalized options in the SUB-MENU of the V6 IIs
to suit your needs. Press
press . Turn the selection dial again will scroll through all the personalized options.
16.1 Selection Dial Direction
In <DIAL DIRECTION>, the selection dial of the V6 IIs can be configured to operate in
a <CLOCKWISE> or <ANTI-CLOCKWISE> direction. To increase the power level in the
main screen, for example, you would have to turn the selection dial to the left in the
clockwise setting, or turn it to the right in the anti(counter)-clockwise setting.
16.2 Selection Dial Lock
To prevent unintended turning of the selection dial and its consequence of affecting
the power levels, the dial can be locked in the main screen of the TX mode:
1. To lock the selection dial, press and hold the selection dial or
The LCD will show [lock] at the left upper corner.
2. To temporarily unlock the selection dial, press the selection dial or
Alternatively, press and hold any group button to select a group for power level
adjustment. The LCD will show [unlock] to indicate the temporary unlock status.
The dial will be locked again when no button or dial is pressed or turned in 2
seconds.
3. The temporary unlock mechanism can be enabled or disabled in the
<TEMPORARY UNLOCK> sub-menu.
4. To permanently unlock the selection dial, press and hold the selection dial or
for 2 seconds.
Note: The short-cut for adjusting the power level of a single group by pressing a
group button and turning the dial simultaneously (see Section 12.1.1) will be
, and turn the selection dial to <GROUP
.
and turn the selection dial to <SUB-MENU>, then
.
for 2 seconds.
once.