Cactus V6 IIs User Manual page 11

The selection dial has a built-in push-in button that serves as a quick OK button. You
may configure how the dial works to suit your working habit. (see Sections 16.1 –
16.6).
Major functions of the V6 IIs listed below are easily accessible by the buttons and
dial.
Group Control (see Section 9.6)
Function
Select a group (e.g., group
A) for adjusting
parameters (power level /
zoom)
Deselect a group (e.g.,
group A)
Turn on / off a group (e.g.,
group A)
Test firing a group (e.g.,
group A)
Group EV Offset in
absolute power mode
(e.g., to group A)
Change the RX to another
group (e.g., to group A)
* Hold = Press and hold the button for 2 seconds, then release.
Adjusting Power Level and Zoom (see Sections 12.1 and 17.1)
Function
Adjust power level of all
groups
Adjust power level of a
single group (e.g., group
A)
Adjust power level of the
Master flash
Quick power
adjustment
Mode LCD
RX Main screen, when the
group is not selected
Main screen, when the
group is selected
Main screen, when the
group is not selected
Main screen
Main screen, in
absolute power mode
RX Main screen
Mode LCD
TX Main screen
Main screen
Main screen
Main screen
Key
Hold*
+
+
Key
+
Hold ,
then
+