Operation - Becker BT-BKRMT Installation Manual

Operation:

Operation:
Operation: Operation:
One of the most important steps in this process is to enable the
"Phone" function within the Becker radio menu. When properly set,
the radio will display "PHONE" when a call is made or received. The
radio will also mute and route the caller's voice to the car speakers
Radios with TP button: (i.e. CDR- - - - 220) Radios with TP button: (i.e. CDR
Radios with TP button: (i.e. CDR Radios with TP button: (i.e. CDR
1. Turn radio "ON"
2. Press and hold the " " button for about 8 seconds until
Becker 1 is displayed.
3. Turn the Tuning Knob until TEL Mode is displayed.
4. Change Setting from "OFF" to "ON"
Radios with ☼ button: (i.e. BE6104)
Radios with Radios with Radios with button: (i.e. BE6104) button: (i.e. BE6104) button: (i.e. BE6104)
1. Turn Radio "ON"
2. Press and hold the ☼ button for about 8 seconds.
3. Select TEL Mode option.
4. Press either button located directly under the Arrows on the
display to change the setting to ON.
220)
220) 220)
Other Radios with ☼button (i.e. BE4602)
Other Radios with button (i.e. BE4602)
Other Radios with Other Radios with button (i.e. BE4602) button (i.e. BE4602)
1. Turn radio ON.
2. Press and hold the ☼ button for 8 seconds, until Becker 1 is
displayed.
3. Turn the Tuning Knob until TEL Mode is displayed.
4. Press either button located directly under the Arrows on the
display to change the present setting from OFF to ON
Radios with 3 Function buttons (i.e. BE4527) Radios with 3 Function buttons (i.e. BE4527) Radios with 3 Function buttons (i.e. BE4527) Radios with 3 Function buttons (i.e. BE4527)
1. Turn radio ON.
2. Press and hold Function button #2 (center) for more than 4
seconds.
3. The accompanying menu appears on the display.
4. Press the multifunction button located directly under "TEL
Mode" on the display to change the present setting from
OFF to ON.
Nav Traffic Radios Nav Traffic Radios Nav Traffic Radios Nav Traffic Radios
1. Press the "Radio" button to enter Radio mode.
2. Press the "Navi" and "F10" simultaneously
3. Press "Next" until the TEL Mode screen
4. Press TEL Mode to enable/disable.