Operation - Becker A2D-BKR Installation Manual

Operation:

Operation:
Operation: Operation:
One of the most important steps in this process is to enable the
AUX function within the radio menu. Most Becker radios are pre- AUX function within the radio menu AUX function within the radio menu AUX function within the radio menu
programmed to recognize a CD Changer connection and because of
that you must perform the following steps and change the setting to
"AUX" otherwise the radio will not recognize the adapter.
Enabling the AUX function Enabling the AUX function Enabling the AUX function Enabling the AUX function
Radios with TP button: (i.e. CDR- - - - 220) Radios with TP button: (i.e. CDR Radios with TP button: (i.e. CDR Radios with TP button: (i.e. CDR
1. Turn radio "ON"
2. Press and hold the "TP" button for about 8 seconds until
Becker 1 is displayed.
3. Turn the Tuning Knob until AUX OFF is displayed.
4. Press either button located directly under the Arrows on the
display to change the present setting from OFF to ON.
Turn radio OFF.
enable the enable the enable the
220) 220) 220)
5. Turn Radio back ON, press the "S S S S " (Source) button to enter
AUX Mode. This is the mode to use whenever you want to
listen to the device connected to the adapter.
Radios with ☼ button: (i.e. BE6104)
Radios with Radios with Radios with button: (i.e. BE6104) button: (i.e. BE6104) button: (i.e. BE6104)
1. Turn Radio "ON"
Press and hold the ☼ button for about 8 seconds.
2.
3. Select AUX "ON/OFF" option.
4. Press either button located directly under the Arrows on the
display to change the setting to ON.
5. Turn radio OFF.
6. Turn Radio back ON press the "☼" button until "AUX" is
displayed.
Other Radios with ☼button (i.e. BE4602)
Other Radios with Other Radios with Other Radios with button (i.e. BE4602) button (i.e. BE4602) button (i.e. BE4602)
1. Turn radio ON.
Press and hold the ☼ button for 8 seconds, until Becker 1 is
2.
displayed.
3. Turn the Tuning Knob until AUX OFF is displayed.
4. Press either button located directly under the Arrows on the
display to change the present setting from OFF to ON
5. Turn Radio back "ON" Press "CD" button to enter AUX
Mode