Replacing A Turn Signal Light Bulb - Yamaha Star Owner's Manual

1. Brake/tail light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
[ECA10682]
Periodic maintenance and adjustment
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screws.
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
7-34
EAU24215
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
7
[ECA10682]